Price POA
Price
POA
Details
Seatrail Trailers was established in 2005 and over the years has produced and sold tens of thousands of boat trailers.
Over that time, we have continued to refine our product to the point where we believe we can offer our customers Australia's best value for money boat trailers.
Here are some of the reasons that make Seatrail Trailers Australia's best value for money boat trailers.
All galvanised steel braked models come standard with a welded in walkway with welded mesh that is not only non-slip but it also drains easily unlike checkerplate which is very slippery and dangerous when wet.
At Seatrail Trailers we use extra-long galvanised steel skids with teflon strips to better support a boats hull than shorter solid teflon skids which tend to sag away from the boat between the posts and you are left supporting the boat only were the uprights are.
All tubing on Seatrail Trailers including frames and crossmembers are bent using a technique called Mandrel Bending which means the tube has a mandrel plug inserted into the tube to support the material during the bending process which gives the tube extra support to reduce wrinkling and loss of strength in the material. It also results in the material maintaining a constant shape throughout the bend.
Maintaining the shape in the material is very important especially in crossmembers so that there is no crease in the top of the crossmember for salt water to pool and create rust problems.
The industry standard is to us 19mm solid posts for centre roller brackets but at Seatrail Trailers we use 30x30x3mm Tubing and reason behind the use of tube instead of solid square is solid square bar tends to vibrate down over time as you are relying on the friction between the post and the end of the bolt which doesn't have a lot of surface area. With hollow tube when you tighten the bolt against the tube the bolt dents the tube which creates a much stronger clamping force and makes it nearly impossible for it to move.
Nationwide Warranty
A product is only as good as its back up warranty and service. At Seatrail Trailers we offer a full Nationwide Warranty with distributors in every state.
We offer a full 2 year warranty on all fabricated components and 12 Months on galvanising for red rust and 3 years on AL-KO brake products.
All of our braked trailers are fitted with genuine Alko products giving customers that reassurance of quality fittings being used on our products.
We can fit most boats to our trailers from 3.5m to 6.5m.
The trailers are due to be back in stock from mid September so contact us to get the latest pricing and secure yours.
Over that time, we have continued to refine our product to the point where we believe we can offer our customers Australia's best value for money boat trailers.
Here are some of the reasons that make Seatrail Trailers Australia's best value for money boat trailers.
All galvanised steel braked models come standard with a welded in walkway with welded mesh that is not only non-slip but it also drains easily unlike checkerplate which is very slippery and dangerous when wet.
At Seatrail Trailers we use extra-long galvanised steel skids with teflon strips to better support a boats hull than shorter solid teflon skids which tend to sag away from the boat between the posts and you are left supporting the boat only were the uprights are.
All tubing on Seatrail Trailers including frames and crossmembers are bent using a technique called Mandrel Bending which means the tube has a mandrel plug inserted into the tube to support the material during the bending process which gives the tube extra support to reduce wrinkling and loss of strength in the material. It also results in the material maintaining a constant shape throughout the bend.
Maintaining the shape in the material is very important especially in crossmembers so that there is no crease in the top of the crossmember for salt water to pool and create rust problems.
The industry standard is to us 19mm solid posts for centre roller brackets but at Seatrail Trailers we use 30x30x3mm Tubing and reason behind the use of tube instead of solid square is solid square bar tends to vibrate down over time as you are relying on the friction between the post and the end of the bolt which doesn't have a lot of surface area. With hollow tube when you tighten the bolt against the tube the bolt dents the tube which creates a much stronger clamping force and makes it nearly impossible for it to move.
Nationwide Warranty
A product is only as good as its back up warranty and service. At Seatrail Trailers we offer a full Nationwide Warranty with distributors in every state.
We offer a full 2 year warranty on all fabricated components and 12 Months on galvanising for red rust and 3 years on AL-KO brake products.
All of our braked trailers are fitted with genuine Alko products giving customers that reassurance of quality fittings being used on our products.
We can fit most boats to our trailers from 3.5m to 6.5m.
The trailers are due to be back in stock from mid September so contact us to get the latest pricing and secure yours.
Region
Western Australia
Location
Wangara WA
Year
2024